RFM offers a full set of custom embedded wireless networking solutions like Zigbee wireless mesh sensor networks, RF modules, IC transceiver, IC transmitters and IC receivers. RFM, Inc. manufactures low power wireless and RF radio modules, wireless mesh nodes for distributed sensing on distributed sensor networks. Low Power radio, n../arrowband and short range devices, front end saw filters, active RFID, RFIC, coupled resonator filters, single silicon chips in the 70MHZ and 300-1000Mhz range.
 
Technical Support       Log In


Bookmark and Share


Click to Download
Wi-Fi + Bluetooth
WLS-Series
Products Guide
(4-Pages)


Wireless Device
Selection Guide

Wi-Fi and Wi-Fi + Bluetooth Combination Short-Range Radio Modules

Only need Wi-Fi? (802.11 b/g/n) Click to choose the WLS1270 Need Wi-Fi + Bluetooth? (802.11 b/g/n) (4.0 + EDR + BLE) Click to choose the WLS1271L Need Wi-Fi + Bluetooth for Medical or highdata? (802.11 a/b/g/n) (4.0 + EDR + BLE) Click to choose the WLS1273L
    Quickly Add Standards-Based Connectivity Into Products
    Best-in-class WLAN and Bluetooth co-existence technology on a single-chip
    Minimal external circuitry required to complete a radio design
    Drivers are available for Linux and Android

    Easily Fits Into Small Spaces: Smaller Than a Dime Yet Features High Level of Integration

    Efficiently Obtain Wi-Fi, Bluetooth, and FCC / ETSI Certification

  • Modules
  • Specifications
  • Evaluation Kits
  • Design Support
  • Block Diagrams

WLS-Series Wi-Fi / Bluetooth Combo Short-Range Radio Modules
RFM Part   Frequency   IEEE 802.11   Bluetooth   Description   Case  
WLS1273L
Wi-Fi + Bluetooth		 2.412 to 2.485 GHz
4.920 to 5.824 GHz		 a/b/g/n compliant 4.0+EDR, Power Class 1.5 +BLE 802.11a/b/g/n + Bluetooth Combo Short-Range Radio Module 11.4mm x 9.4 mm x 1.4 mm
WLS1271L
Wi-Fi + Bluetooth		 2.412-2.485 GHz b/g/n compliant 4.0+EDR, Power Class 1.5 +BLE 802.11b/g/n + Bluetooth Combo Short-Range Radio Module 9.2mm x 8.4 mm x 1.35 mm
WLS1270
Wi-Fi Only		 2.412-2.485 GHz b/g/n compliant n/a 802.11b/g/n Short-Range Radio Module 9.2mm x 8.4 mm x 1.35 mm

Samples
RFM Part    
WLS1273L-S Samples are available for design support. Please contact your local RFM authorized sales representative or distributor for more information. Click Here locate a sales rep or distributor nearest you.
WLS1271L-S
WLS1270-S

  IEEE 802.11 SPECIFICATION HIGHLIGHTS

IEEE 802.11 WLS1270   WLS1271L   WLS1273L  
b/g/n compliant b/g/n compliant a/b/g/n compliant
Operating Frequency Range 2.412 to 2.485 GHz 2.412 to 2.485 GHz 2.412 to 2.485 GHz
4.920 to 5.824 GHz
Power Output Up to 18 dBm Up to 18 dBm Up to 18 dBm
Supply Current TX -180 mA / RX -100 mA TX -180 mA / RX -100 mA TX -170 mA / RX -100 mA
Size 9.2mm x 8.4 mm x 1.35 mm 9.2mm x 8.4 mm x 1.35 mm 11.4mm x 9.4 mm x 1.4 mm
Microprocessor Embedded ARM Microprocessor Embedded ARM Microprocessor Embedded ARM Microprocessor
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C
Other Supports SDIO host interface for WLAN Supports SDIO host interface for WLAN Supports SDIO host interface for WLAN

  BLUETOOTH SPECIFICATION HIGHLIGHTS

Bluetooth   WLS1271L   WLS1273L  
    4.0 plus EDR, Power Class 1.5 + BLE 4.0 plus EDR, Power Class 1.5 + BLE
Operating Frequency Range   2.4000 to 2.4835 GHz 2.4000 to 2.4835 GHz
Power Output   Up to 8 dBm Up to 6 dBm
Supply Current   35 mA 35 mA
Data Rate   Up to 3 Mb/s Up to 3 Mb/s

Fast-track Your Design...
Order Your Evaluation Kits and Samples Today!

Evaluation Kits
Each Kit Contains:
  • Test Wi-Fi RF performance
  • Test Bluetooth RF performance
  • SDIO interface
  • Hi Speed Serial interface
  • Host Interface

    Evaluation Kit Contains

  • (1) Evaluation Board
  • CD with GUI
  • USB to Serial Converter
  • (2) 2.4 / 5.8 GHz Antennas
    • RFM Part   Frequency   Description  
    DR-WLS1273L-EV 2.412 to 2.485 GHz & 4.920 to 5.824 GHz Evaluation Kit for the WLS1273L
    DR-WLS1271L-EV 2.412-2.485 GHz Evaluation Kit for the WLS1271L
    DR-WLS1270-EV 2.412-2.485 GHz Evaluation Kit for the WLS1270

    Design Support

    Block Diagrams