RFM offers a full set of custom embedded wireless networking solutions like Zigbee wireless mesh sensor networks, RF modules, IC transceiver, IC transmitters and IC receivers. RFM, Inc. manufactures low power wireless and RF radio modules, wireless mesh nodes for distributed sensing on distributed sensor networks. Low Power radio, n../arrowband and short range devices, front end saw filters, active RFID, RFIC, coupled resonator filters, single silicon chips in the 70MHZ and 300-1000Mhz range.
 
Technical Support       Log In



Download 2009
Wireless Device
Selection Guide

Bookmark and Share

HN-1010

 2.4 GHz Serial Modem
Built on the heritage of the original FHSS family of modems and combining the advanced features of the WIT2410 OEM module, there is a HN 10 Series modem that suits every need, from the relative comfort of an office to the harsh conditions on the factory floor to the unpredictable weather of an outdoor location.

download data sheet Rev Date 04/10/08

download product manual

  • Features
  • AppNotes
  • Buy Now
Based on 2.4GHz frequency hopping spread spectrum technology, all HN 10 Series modems provide extraordinary range while providing immunity to jamming and multipath fading. All backed by extensive experience in wireless technology. All HN 10 Series standalone modems feature a high data rate (460Kbps over the air) and long range (over 5 miles using HN 10 external gain antennas). Both point-to-point and pointto- multi-point network configurations are supported.

Product Manuals
Application Notes
    AN80201
    Wireless Temperature Sensor
    ANM1001
    A Solar Energy Harvester for Wireless Sensor Networks
    ANM1002
    Sizing Solar Energy Harvesters for Wireless Sensor Networks
White Papers
    Lightning and Surge Protection
    Because wireless systems are typically located out of doors and have components located on towers and tall buildings, they are especially susceptible to damage from lightning. This paper explores the proper design and implementation of a communications surge protection system to reduce down time and lower liability for people and property. (~ 152 KB, Adobe PDF format.)
    RF Power Options in ZigBee™ Solutions
    While ZigBee is a "low power" standard, "high power" product versions are much needed — and are very much ZigBee standard. This paper explains how the the availability of ZigBee radios with high and low RF power options is key to ZigBee's appeal in industrial settings, allowing design engineers to tie radio selection directly to an application’s requirements for range and resistance to multipath fading.
    WaveBolt System Description
    The WaveBolt™ system is a fixed wireless point-to-multipoint Internet access system designed specifically for residential and small business customers in areas where DSL and cable modem access are unavailable, unaffordable or otherwise undesirable. The WaveBolt system provides data speeds comparable to ADSL. Simple to install, the WaveBolt CPE in many cases will be installed by the end user. And, where customers choose to have the CPE installed, a single, short site visit is all that is required to complete the installation. (~ 162 KB, Adobe PDF format.)
    Wireless Communications for Industrial Applications
    This paper examines the unique requirements and challenges of wireless communications in an industrial setting and provides an overview of RFM wireless products designed specifically for these applications. The information presented serves as a guide for systems integrators and end users responsible for factory floor automation, industrial/PLC control, SCADA, telemetry and related data communications applications. (~ 136 KB, Adobe PDF format.)
    Wireless Transceivers—Make or Buy?
    In choosing to add wireless data capability to a new or existing product, every designer faces a critical decision: whether to engineer the functionality in-house or buy a ready-made module for the application. This paper provides a cost analysis to explore the relative merits of each approach. (~ 160 KB, Adobe PDF format)
    ZigBee Wireless Transceiver Engineering Options
    ZigBee's mesh networking capability, which compensates for obstructions and reduces range requirements, is especially prized in industrial applications. But with a technology this new, how can the RF designer best realize a successful ZigBee implementation? This white paper provides a brief, realistic assessment of ZigBees value in industrial environments, examines the types of components available today at the chip and module level, and discusses the practical considerations to be weighed in deciding to pursue ZigBee mesh networking in a specific application.
Case Studies
    Digital sign control
    A maker of commercial electronic signs chose RFM HopNet wireless serial modems to replace costly cabling runs.
    Heavy duty automation
    Wireless communications from databases to crane scales automate aluminum manufacturing.
    Parking control
    Upgrading a parking facility to monitor space availability without cutting cable trenches.
Acal Avnet Digi-Key Mouser Nu Horizons North America Countries

RFM products are sold through a world-wide network of manufacturer's sales reps and distributors.

Need a Quote & Availability?
Not Finding What You Need?
Have a Technical Question?
First Name Last Name
Company Name
Email Address Phone
State (if in USA or Canada):
Country
Comments: